Product code: NPR-01

Frazier 25000 revs/min is intended for hardware manicure, pedicure and correction of gel and acrylic nails. Key features of any router's power, rotation speed and torque. Power consumption is measured in watts and shows how Frazier uses of electricity. Power router 35000 35 Wat.

Handle motor is light and small, conveniently lies in a hand. Its weight of 240 gr. Length 14 cm It is made of metal. Airflow for cooling protects the engine from overheating.

To use router is very simple. Connect the handle to the power supply. Also connect a pedal to control nianogo, if you are going to use it. Before you enable the router necessary to install the nozzle. Mechanism nozzles faced with the reality of the cutter and holds her tightly, the heart prevents vibration during robots. To prevent damage it is not recommended to close the handle without insert or core plugs. Turn on the power using the button on the side of the unit. Next, select the operation mode manual or foot control. When you turn lights the red button. In manual control is used the mechanical regulator on the power supply which regulate the speed of rotation of the cutter. Mode foot control pedal thanks to the rheostat you can turn on and off the router, and adjust the rotation speed when the pedal is pressed. To enable the reverse, that is, rotation in the opposite direction, it is necessary to turn off the router. To do this, move the speed control to 0 in manual operation or release the foot from the foot control, then set the switch to the reverse mode R and then restart the router. To prevent damage it is recommended not to include reverse on the go. Frazier 25000 has a low level of noise and vibration which makes it comfortable to use for the wizard.