High quality ball sterilizer in a plastic case, presented by Global Fashion. The ball sterilizer is also called a quartz sterilizer. It is designed for the high-temperature treatment of metal instruments. The outer casing of the sterilizer features a sturdy plastic housing that is virtually unheated during operation. The inner bulb is made of heat-resistant metal. In this bulb the supplied quartz glass balls are inserted. During the sterilizer operation, the temperature of the flask reaches 185 degrees and the temperature of the balls inside it reaches 200 degrees.

All known bacteria, complex viruses, fungi and other trace elements quickly die at this temperature. When the sterilizer is turned on, a red and a green light comes on. The red light means that the sterilizer is on, the green light means that the machine is in warm-up mode. The time to heat the pellets to maximum temperature is 15 minutes. If the sterilizer is used in the salon, it can be on throughout the working day. Before sterilization the instruments must be thoroughly cleaned and disinfected with a special solution. You can find out how to disinfect your instruments correctly from the methodical instructions of the preparation you are using. After that the instruments should be dried. It is not recommended to place wet instruments in the ball sterilizer to avoid corrosion of the instruments. The instruments are sterilized for a very short time of no more than 20 seconds. Prolonged exposure to heat causes blunting of the instruments. Housing is white. The power of the device is 100W. Small sterilizer parameters: diameter of the lower part: 16 cm, height 17 cm, weight with balls: 720 grams. The parameters of the big sterilizer: The diameter of its lower part is 16 cm, height 20 cm, weight with balls - 785 grams. The diameter of the inner bowl is 4 cm. It is important to know that over time, steam loses good heat conductivity and can no longer heat to a temperature of 200 degrees. That is why it is recommended to change the stuffing completely every six months: quartz balls, which can be purchased separately. .

Global Fashion blue ball sterilizer, Tools Sterilizer

Code of product: 11053
Stock balance: not available
312 ₴
7,24 €
7,92 $
33 bought
33 bought
Description

High quality ball sterilizer in a plastic case, presented by Global Fashion. The ball sterilizer is also called a quartz sterilizer. It is designed for the high-temperature treatment of metal instruments. The outer casing of the sterilizer features a sturdy plastic housing that is virtually unheated during operation. The inner bulb is made of heat-resistant metal. In this bulb the supplied quartz glass balls are inserted. During the sterilizer operation, the temperature of the flask reaches 185 degrees and the temperature of the balls inside it reaches 200 degrees.

All known bacteria, complex viruses, fungi and other trace elements quickly die at this temperature. When the sterilizer is turned on, a red and a green light comes on. The red light means that the sterilizer is on, the green light means that the machine is in warm-up mode. The time to heat the pellets to maximum temperature is 15 minutes. If the sterilizer is used in the salon, it can be on throughout the working day. Before sterilization the instruments must be thoroughly cleaned and disinfected with a special solution. You can find out how to disinfect your instruments correctly from the methodical instructions of the preparation you are using. After that the instruments should be dried. It is not recommended to place wet instruments in the ball sterilizer to avoid corrosion of the instruments. The instruments are sterilized for a very short time of no more than 20 seconds. Prolonged exposure to heat causes blunting of the instruments. Housing is white. The power of the device is 100W. Small sterilizer parameters: diameter of the lower part: 16 cm, height 17 cm, weight with balls: 720 grams. The parameters of the big sterilizer: The diameter of its lower part is 16 cm, height 20 cm, weight with balls - 785 grams. The diameter of the inner bowl is 4 cm. It is important to know that over time, steam loses good heat conductivity and can no longer heat to a temperature of 200 degrees. That is why it is recommended to change the stuffing completely every six months: quartz balls, which can be purchased separately. .

Specification
Specification
Viewers 859
Dimensions
Length 16.00
Width 16.00
Height 17.00
Reviews (0)

Select the appropriate
number of stars

Photo review

There are no reviews for this product.

In the fashion industry, cleanliness and sanitation are essential. When it comes to nail extensions, it becomes crucial to maintain hygiene and avoid the spread of infections among clients. This is where sterilization of tools plays a significant role.

One of the most effective ways to sterilize nail tools is by using a ball sterilizer. A ball sterilizer is a small, compact device used to disinfect metal tools such as clippers, tweezers, and scissors. It works by heating small balls of disinfectant material, which then create steam to sanitize the tools.

The Global Fashion Blue Ball Sterilizer is one such device widely used in the beauty industry. It is easy to use, affordable and is available in different sizes to suit different tool requirements.

The sterilizer consists of a heating base, a removable bowl, and a lid. The bowl is filled with sterilization balls, which are made of a mix of chemicals like ethyl alcohol, boric acid, and other disinfectants that kill bacteria, viruses, and other germs commonly found on nails and in surrounding areas.

Once the device is plugged in and the sterilization balls are heated, the tools are placed inside the bowl and left for a short amount of time. The heat from the sterilization balls will kill any remaining bacteria or virus on the tools, making them safe for the next client.

Using a ball sterilizer is an effective and straightforward way to maintain hygiene in the nail extension industry. In addition, it ensures that nail technicians are following the correct hygiene protocols as per regulatory guidelines.

However, it is essential to also follow proper sterilization techniques to avoid cross-contamination between clients. Before and after using the ball sterilizer, it is necessary to clean the tools with soap and water and then rinse them well. After sterilization, the tools must be stored in a clean and dry space.

In conclusion, the use of a global fashion blue ball sterilizer is essential to maintain hygienic practices in the nail extension industry. It is important to invest in the correct sterilization equipment and follow proper protocols to ensure the safety and well-being of clients.