Product code: M-809 Fraser Nail Polish 25000 revs/min is intended for hardware manicure and correction of gel and acrylic nails. Key features of any router's power, rotation speed and torque. Power consumption is measured in watts and shows how Frazier uses of electricity. The capacity of the mill Nail Polish 25000 18 Wat.

The rotation speed is measured by the number of revolutions of cutter per minute, the maximum rotation speed of a router 25000 rpm. Torque indicates the force with which the rotation of the cutter. The higher the torque, the more they need external forces to stop the cutter. Torque Nail Polish 25000 1 Newton/cm this router allows you to only do hardware manicure and correction of nails, but is not suitable for hardware pedicure.

The kit includes power supply, pen, stand by press the pedal, the set of nozzles (6 pieces) and disposable caps.

Handle motor is light and small, conveniently lies in a hand. Its weight of 240 gr. Length 14 cm It is made of metal.

To use router is very simple. Connect the handle to the power supply. Also turn on the pedal for nianogo control, if you are going to use it. Before you enable the router necessary to install the nozzle. Mechanism nozzles faced with the reality of the cutter and holds her tightly, the heart prevents vibration during robots. To prevent damage it is not recommended to close the handle without insert or core plugs. Turn on the power using the button on the front panel of the unit. When you turn lights the red button. In manual control is used the mechanical regulator on the power supply which regulate the speed of rotation of the cutter. Mode foot control you need to turn the power off with the button on the control panel, put the button in position "feet", with a mechanical regulator set the speed and turn on the router. When the pedal is depressed, the router starts to work and the light. To enable the reverse, that is, rotation in the opposite direction, it is necessary to turn off the router and press the button on the reverse side. Noise and vibration can not be attributed to the advantage of this router, so don't recommend it for professional use. It is more suitable for infrequent work, to work in the field or for home use.

Drying-mill for varnish M-809

Code of product: 6324
Stock balance: not available
201 ₴
4,67 €
5,11 $
Description

Product code: M-809 Fraser Nail Polish 25000 revs/min is intended for hardware manicure and correction of gel and acrylic nails. Key features of any router's power, rotation speed and torque. Power consumption is measured in watts and shows how Frazier uses of electricity. The capacity of the mill Nail Polish 25000 18 Wat.

The rotation speed is measured by the number of revolutions of cutter per minute, the maximum rotation speed of a router 25000 rpm. Torque indicates the force with which the rotation of the cutter. The higher the torque, the more they need external forces to stop the cutter. Torque Nail Polish 25000 1 иновацияton/cm this router allows you to only do hardware manicure and correction of nails, but is not suitable for hardware pedicure.

The kit includes power supply, pen, stand by press the pedal, the set of nozzles (6 pieces) and disposable caps.

Handle motor is light and small, conveniently lies in a hand. Its weight of 240 gr. Length 14 cm It is made of metal.

To use router is very simple. Connect the handle to the power supply. Also turn on the pedal for nianogo control, if you are going to use it. Before you enable the router necessary to install the nozzle. Mechanism nozzles faced with the reality of the cutter and holds her tightly, the heart prevents vibration during robots. To prevent damage it is not recommended to close the handle without insert or core plugs. Turn on the power using the button on the front panel of the unit. When you turn lights the red button. In manual control is used the mechanical regulator on the power supply which regulate the speed of rotation of the cutter. Mode foot control you need to turn the power off with the button on the control panel, put the button in position "feet", with a mechanical regulator set the speed and turn on the router. When the pedal is depressed, the router starts to work and the light. To enable the reverse, that is, rotation in the opposite direction, it is necessary to turn off the router and press the button on the reverse side. Noise and vibration can not be attributed to the advantage of this router, so don't recommend it for professional use. It is more suitable for infrequent work, to work in the field or for home use.

Specification
Specification
Viewers 1585
Reviews (0)

Select the appropriate
number of stars

Photo review

There are no reviews for this product.